色偷偷wwww88888,少妇熟女高潮流白浆,极品人妻VIDEOSSS人妻,九九热在线视频观看这里只有精品

FLT-05ST_FLT-05C_FLT-05T_FLT-39G_FLT-39SA_FLT-39ST轉子流量計OMEGA

多管組件

氣體比例調節器

本頁所示的流量管可安裝在FL3000、氣體比例FL-1GP系列或多管FL-2AA系列150 mm轉子流量計中。所示流量基于21°C（70°F）和14.7 psia下空氣和水的校準。對于其他流體或條件，以下方程提供粗略的近似值。

FLT-05ST_FLT-05C_FLT-05T_FLT-39G_FLT-39SA_FLT-39ST轉子流量計OMEGA

氣體

qa=qg x[g x（ta/t0）x（p0/pa）]1/2

哪里：

qa=標準條件下的等效空氣流量標度讀數

Qg=計量氣體的真實流量

g=計量氣體的比重

Ta=流動條件下的絕對溫度（開爾文或朗肯）

t0=標準條件下的絕對溫度（294 K或530°R）

pa=流動條件下的壓力（psia）

p0=標準條件下的壓力（14.7 psia）

液體

qw=ql x[（df-dw）/（df-dl））x（dl/dw）]1/2

哪里：

Qw=標準條件下的等效水流量

ql=計量液體的最大流量

df=所選浮筒的密度

玻璃：2.53 g/ml

藍寶石：3.98 g/ml

不銹鋼：8.04 g/ml

碳合金：14.98 g/ml

鉭：16.58 g/ml

dl=計量液體的密度，g/ml

dw=標準條件下的水密度（1.0 g/ml）

（注：不包括粘度效應）

FLT-05ST_FLT-05C_FLT-05T_FLT-39G_FLT-39SA_FLT-39ST轉子流量計OMEGA

Multitube Assemblies

Gas Proportioners

The flow tubes shown on this page can be installed into the FL3000, gas proportioning FL-1GP Series or multiple tube FL-2AA Series 150 mm rotameters. Flow capacities shown are based on calibrations with air and water at 21°C (70°F) and 14.7 psia. For other fluids or conditions, the following equations provide rough approximations.

GAS

Qa = Qg x [G x (Ta/T0) x (P0/Pa)]1/2

where:

Qa = equivalent air flow scale reading at Standard Conditions

Qg = true flow of metered gas

G = specific gravity of metered gas

Ta = absolute temperature at flow conditions (Kelvin or Rankine)

T0 = absolute temperature at standard conditions (294 K or 530°R)

Pa = pressure at flow conditions (psia)

P0 = pressure at Standard Conditions (14.7 psia)

LIQUID

Qw = QL x [(df - dw)/(df - dL)) x (dL/dw)]1/2

where:

Qw = equivalent water flow capacity at Standard Conditions

QL = max flow of metered liquid

df = density of float selected

   Glass: 2.53 g/ml

   Sapphire: 3.98 g/ml

   Stainless Steel: 8.04 g/ml

   Carboloy: 14.98 g/ml

   Tantalum: 16.58 g/ml

dL = density of metered liquid, g/ml

dw = density of water at Standard Conditions (1.0 g/ml)

(note: does not include viscosity effect)