197光電斬波器
價 格：詢價
產 地：美國更新時間：2020-10-29 17:23
品 牌：Signal Recovery型 號：197
狀 態(tài)：正常點擊量：2576
400-006-7520
聯系我時，請說明是在上海非利加實業(yè)有限公司上看到的，謝謝！
聯 系 人：
上海非利加實業(yè)有限公司
電 話：
400-006-7520
傳 真：
400-006-7520
配送方式：
上海自提或三方快遞
聯系我時請說在上海非利加實業(yè)有限公司上看到的,謝謝！
產品參數
Operation | |
| Frequency | 15 Hz to 3000 Hz |
| outer sector | 150 Hz to 3000 Hz |
| inner sector | 15 Hz to 300 Hz |
| Control | |
| manual | Digital push-button |
| external | Application of 0.5 V to 10 V sine or squarewave, 150 Hz to 3000 Hz to Sync In BNC connector |
| Internal Frequency | |
| accuracy | ±20 ppm at 25 °C |
| stability | ±30 ppm/ °C (range -10 °C to 60 °C) |
| Jitter (measured pk-pk and presented as a % of a full cycle) | |
| outer sector | |
| 150 to 500 Hz | blade only: 0.5%; blade + electronics: 1.5% |
| 500 to 3000 Hz | blade only: 0.5%; blade + electronics: 1.0% |
| inner sector | |
| 15 to 50 Hz | blade only: 0.5%; blade + electronics: 1.5% |
| 50 to 300 Hz | blade only: 0.5%; blade + electronics: 1.0% |
| Lock indication | Bicolor LED, showing Red when unlocked and Green when locked |
| Settling Time | 7 s nominal at 1 kHz from switch-on;
9 s nominal for frequency change from 150 to 3000 Hz;
30 s nominal for frequency change from 3000 to 150 Hz |
Outputs | Sync Out 1 | 10 V pk-pk squarewave at outer sector chopping frequency, 150 - 3000 Hz |
| Sync Out 2 | 10 V pk-pk squarewave at inner sector chopping frequency, 15 - 300 Hz |
| Connectors | BNC |
| Impedance | 10 kW. Note that although the output voltage is 10 V pk-pk, the high output impedance means that the outputs can be directly connected to the Reference Frequency input of any SIGNAL RECOVERY lock-in amplifier without causing problems. |
Power Requirements | Via power adapter for 110 V AC, 50/60 Hz or 220/240 V AC, 50/60 Hz or external isolated 17 V to 20 V DC or AC rms. supply. State which voltage is required when ordering |
Dimensions | 4" high x 4.8" wide x 1.7" deep
(104 mm wide x 122mm wide x 44mm deep) |
Weight | 1 lb (0.45 kg) excluding power supply |
滬公網安備31011502016460號
