色偷偷wwww88888,少妇熟女高潮流白浆,极品人妻VIDEOSSS人妻,九九热在线视频观看这里只有精品

CCT系列DIN軌道信號調節器設計用于接收廣泛的輸入信號，如交流和直流電壓和電流、頻率、溫度（熱電偶和RTD）和過程傳感器，并提供0/4至20 mA或0至10 Vdc的標準過程輸出。CCT系列采用現代外殼設計，易于安裝在標準DIN導軌上。連接安全可靠，輸入和輸出連接在模塊的另***側。

內部設計：CCT系列采用內部插件三模塊系統設計，可靈活選擇和更改電源、輸入信號和輸出信號。該裝置提供110伏交流電標準電源，220伏交流電和24伏直流電請咨詢銷售。

CCT-22-0/400C_CCT-23-0/1000C_CCT-24-0/200C_CCT-24-0/300C信號調節器OMEGA

電源：110 Vac（標準）；220 Vac或24 Vdc（可選）（所有電源的公差為±10%）

輸出：4至20 mA和0至10 Vdc標準；通過跳線選擇0至20 mA

精度：≤0.2%或≤0.3，%，取決于型號

響應時間：≤250 ms

隔離：2 kVeff

紋波：≤0.5%

帶通：1.5赫茲（-3分貝）

工作環境：-10至60°C（14至140°F）

儲存環境：-30至80°C（-22至176°F）

溫度系數：≤0.015%/°C

功耗：最大1.5 VA

外殼：聚碳酸酯，RAL 7032；UL 94 V-1，IP40保護

端子外殼：聚碳酸酯，UL 94-2，IP20保護

最大線徑：4 mm2（14 AWG）

尺寸：75 H x 45 W x 110 mm D（2.95“x 1.77”x 4.33“）

重量：270克（0.6磅）

安裝：DIN軌道46277和EN 50022（35 x 7.5 mm）

CCT-22-0/400C_CCT-23-0/1000C_CCT-24-0/200C_CCT-24-0/300C信號調節器OMEGA

Voltage, Current, Frequency, Resistance, Potentiometer, Thermocouple, RTD and Strain Gage Input ModulesIntegrator Modules Convert Voltage or Current to Frequency

Loop Powered Galvanic Isolator Provides 2 kVeff Isolation Between Input and Output

Compatible with Standard 35 mm DIN Rail

The CCT series DIN rail signal conditioners are designed to accept a broad range of input signals, such as ac and dc voltage and current, frequency, temperature (thermocouple and RTD), and process transducers, and provide standard process outputs of either 0/4 to 20 mA, or 0 to 10 Vdc. The CCT series features a modern housing design, that is easily mounted on standard DIN rails. Connections are safely and securely made, with input and output connections on the opposite sides of the module.

Internal Design

The CCT series is designed using an internal plug-in three module system that provides flexibility in selecting and changing the power supply, input signal and output signal. The units are supplied with 110 Vac power standard, Consult sales for 220 Vac, and 24 Vdc power.

Isolation

The three internal modules in each signal conditioner (signal input, signal output and power supply) are isolated up to 2 kVeff.

Outputs

Each CCT series signal conditioner is available with current and voltage output (only one may be used at a time). Available output types include 4 to 20 mA or 0 to 20 mA (jumper-selectable) and 0 to 10 Vdc.

Standard outputs are linear and proportional to the signal input. Thermocouple input modules feature special circuitry to linearize the output to the actual temperature, and not to the non-linear signal produced by thermocouple sensors.

Specifications

Power: 110 Vac (standard); 220 Vac or 24 Vdc (optional) (±10% tolerance on all power supplies)

Output: 4 to 20 mA and 0 to 10 Vdc standard; 0 to 20 mA via jumper select

Accuracy: ≤0.2% or ≤0.3,%, depending on the model

Response Time: ≤250 ms

Isolation: 2 kVeff

Ripple: ≤0.5%

Bandpass: 1.5 Hz (-3 dB)

Operating Ambient: -10 to 60°C (14 to 140°F)

Storage Ambient: -30 to 80°C (-22 to 176°F)

Temperature Coefficient: ≤0.015%/°C

Power Consumption: 1.5 VA max

Enclosure: Polycarbonate, RAL 7032; UL 94 V-1, IP40 protection

Terminal Housing: Polycarbonate, UL 94-2, IP20 protection

Max Wire Size: 4 mm2 (14 AWG)

Dimensions: 75 H x 45 W x 110 mm D (2.95" x 1.77" x 4.33")

Weight: 270 g (0.6 lb)

Mounting: DIN rail 46277 and EN 50022 (35 x 7.5 mm)