DRC-4710_DRC-4720導軌安裝式電橋輸入信號調節器OMEGA歐米茄
價 格:詢價
產 地:美國更新時間:2020-10-28 13:11
品 牌:歐米茄型 號:DRC-4710
狀 態:正常點擊量:1650
上海非利加實業有限公司
聯 系 人: 上海非利加實業有限公司
電 話: 400-006-7520
傳 真: 400-006-7520
配送方式: 上海自提或三方快遞
聯系我時請說在上海非利加實業有限公司上看到的,謝謝!
DRC-4710_DRC-4720導軌安裝式電橋輸入信號調節器OMEGA歐米茄
DIN導軌安裝
電橋輸入(稱重傳感器、應變計)或電壓輸入
0至10 Vdc(DRC-4710)或4至20 mA(DRC-4720)輸出
經濟型
DRC-4710和DRC-4720 DIN軌道安裝信號調節器是獨立的直流供電模塊,設計用于電橋輸入(稱重傳感器、應變計)或電壓輸入(不連接電橋,不使用勵磁電源)。這些信號調節器包括精密儀表放大器、濾波輸出和內置10V勵磁電源,能夠驅動350Ω電橋。
產品參數
DRC-4710_DRC-4720導軌安裝式電橋輸入信號調節器OMEGA歐米茄
輸入
輸入范圍:0至10 mV、0至20 mV、0至30 mV(DIP開關可選)
線性度:±0.01%
溫度系數:0.05%/°C
輸入偏移電壓:±70微伏
輸入偏移電壓溫度系數:0.7微伏/攝氏度
共模電壓:0至5V
共模抑制(DC):100 dB
輸入噪聲:0.3μV pp典型值(0.1至10 Hz)
產量
輸出范圍:DRC-4710:0至10 Vdc
DRC-4720:4至20 mA
負載電流(DRC-4710):最大5 mA
合規電壓(DRC-4720):最大5.5 V
回路電阻(DRC-4720):最大250Ω
頻率響應(2極濾波器):直流至10Hz
總均方根增益溫度系數:0.007%/°C
橋勵磁電源
固定輸出:10V±1.5%
溫度系數:0.05%/°C
負載電流:最大30 mA
總功率:18至26 Vdc
功耗(一個350Ω電橋):
DRC-4710:0.96 W(40 mA@24 Vdc)
DRC-4720:1.32 W(55 mA@24 Vdc)
工作環境:0至55°C(32至131°F)
儲存溫度:-40至80°C(-40至176°F)
尺寸:96 H x 27 W x 42 mm D(3.78 x 1.06 x 1.65“)
重量:85克(3盎司)
產品介紹
DRC-4710_DRC-4720導軌安裝式電橋輸入信號調節器OMEGA歐米茄
DIN Rail Mount
Bridge Input (Load Cell, Strain Gage) or Voltage Input
0 to 10 Vdc (DRC-4710) or 4 to 20 mA (DRC-4720) Output
Economical
The DRC-4710 and DRC-4720 DIN rail mount signal conditioners are self-contained DC powered modules designed for bridge input (load cell, strain gage) or voltage input (not connected to a bridge, excitation supply not used). These signal conditioners contain a precision instrumentation amplifier, filtered output and a built-in 10V excitation supply capable of driving a 350 Ω bridge.
The 0 to 30 mV input range makes the DRC-4710 and DRC-4720 compatible with most strain gage based load cell or pressure transducer outputs. Two models are available, one with 0 to 10 Vdc output (DRC-4710), and the other with 4 to 20 mA output (DRC-4720). Connections are made via easily accessible screw terminal blocks. Zero and Span adjustment potentiometers are located externally as well for easy access.
Specifications
INPUT
Input Range: 0 to 10 mV, 0 to 20 mV, 0 to 30 mV (dip switch selectable)
Linearity: ±0.01%
Temperature Coefficient: 0.05%/°C
Input Offset Voltage: ±70 μV
Input Offset Voltage Temperature Coefficient: 0.7 μV/°C
Common Mode Voltage: 0 to 5V
Common Mode Rejection (DC): 100 dB
Input Noise: 0.3 μV pp typ (0.1 to 10 Hz)
OUTPUT
Output Range: DRC-4710: 0 to 10 Vdc
DRC-4720: 4 to 20 mA
Load Current (DRC-4710): 5 mA max
Compliance Voltage (DRC-4720): 5.5V max
Loop Resistance (DRC-4720): 250 Ω max
Frequency Response (2-Pole Filter): DC to 10 Hz
Total RMS Gain Temperature Coefficient: 0.007%/°C
BRIDGE EXCITATION SUPPLY
Fixed Output: 10V ±1.5%
Temperature Coefficient: 0.05%/°C
Load Current: 30 mA max
GENERAL Power: 18 to 26 Vdc
Power Consumption (One 350 Ω Bridge):
DRC-4710: 0.96 W (40 mA @ 24 Vdc)
DRC-4720: 1.32 W (55 mA @ 24 Vdc)
Operating Ambient: 0 to 55°C (32 to 131°F)
Storage Temperature: -40 to 80°C (-40 to 176°F)
Dimensions: 96 H x 27 W x 42 mm D (3.78 x 1.06 x 1.65")
Weight: 85 g (3 oz)